JetMax F24 - The Most Advanced Robotic Pool Cleaner
Buy this Commercial Pool Cleaner here
JetMax F24, the latest in robotic pool cleaning technology is recommended for pools up
to 120' and a maximum capacity of 700,000 gallons.
The JetMax F24 presents a new standard for robotic pool cleaners in terms of
capability, function, simplicity and ease of use. The Jet Drive Propulsion System
provides hydro-scrubbing, vacuuming and driving capabilities with its single on-board
Pump Motor, eliminating the need for costly “wear and tear” parts like drive belts, tracks,
brushes, gears and complex drive motors. As the robotic pool cleaner travels across the
pool floor, a portion of filtered water is diverted by the hydro-jet impeller forcing water
under high pressure through tubing to the hydro-scrubbing nozzles beneath the JetMax
F24. The strong jets of water from these nozzles “scrub” dirt and debris (including sand
and silt) out of porous pool surfaces. Debris hydro-scrubbed off the pool floor is lifted
upwards and is vacuumed into JetMax F24’s internal oversized 2 micron filter bag,
even when the cleaner is moving at very high speeds. The re-usable filter bag is easily
removed, cleaned and remounted providing years of reliable service.
JetMax F24 – Advanced Features include:
- Fewest consumable “wear and tear” parts.
- 120’ cable to accommodate the largest pools.
- 17 pounds, it’s lighter than every robotic pool cleaner in its class.
- Most powerful self-contained Pump of any cleaner in its class.
- Cleans pools up to 120 feet long; in half the time as most other robotic cleaners.
- Unique scanning pattern guides the cleaner to fully vacuum most pool floors in
about 1-2 hours.
- Perfect for the slopes, curls, and curves of Grecian, Kidney-shape, or gradient-
walled pools.
- Jet-Drive Propulsion uses the water pressure from the Pump to move the unit.
- No Drive Motor needed!
- Non-scuff rubber wheels guide the momentum of the JetDrive Propulsion. No
Belts or Tracks needed!
- Simple to use design. Top half of machine easily separates for debris removal
and filter cleaning.
- Internal Cartridge filters down to 2 micron. Maximized filter surface with 24
square feet of area.
- Large Suction Inlets provide 50% more water flow and vacuum larger debris.
- Adjustable Suction Inlets allow user to raise and lower point of suction. Better for
fine debris.
- Pump has Thermostat Box to regulate temperature, prolong motor life and
reduce service costs.
- Obstacle Sensors to detect walls and objects in the pool. Magnetic sensors
detect stopped motion.
- 1 Year Warranty on plastics, electronics and motor.
- Stay-Cool Power Supply with Digital 1-7 hour adjustable automatic shut-off or
continuous run.
- Adjustable Axle with Locking Pins to set the appropriate cleaning pattern for the
pool’s width.
JetMax F24 – The robotic pool cleaner that cleans the biggest commercial pools.
|